Henan Lingfine Machinery Co., LTD. is a professional engineering modern enterprise specializing in various kinds of vegetable oil, animal and fish oil production line, waste engine oil regeneration line, biodiesel production line, waste tires, plastics and rubbers pyrolysis line, essential oil and pigment extraction machine, has engineering design, equipment manufacture, technology research, sales, installation and commissioning, after-sale service etc.
---Cooking Oil Project---
---Cooking Oil Production Line---
Waste Used Oil Recycling Plant Process Re refining base oil
The input product for this Waste Lube Oil Plant process includes all kinds of waste or used lube oil; gear oil, engine oil, hydraulic oil, etc. After the process, our output product is Base oil; 75% to 80% of Base Oil Group 1 and 2, with two cuts; SN150 and SN500, 7% of diesel, 3% of water and 10% of asphalt.
automatic oil water separator for power plant - hrpalmoilmachine
Automatic oil water separator for power plant LYSF land oil water separator treatment process is gravity separation of wastewater treatment system , coarse graining, adsorption coalescence. It is made of carton steel cylinder, pump, oil tank, electronic controller.
Oil Water Separation (Water and Wastewater) Equipment
Oil water separation for the steel industry; Oil separation and removal systems for the Food and beverage industry; Total Petroleum Hydrocarbons analysis for wastewater and soil; Petroleum recovery for groundwater remediation; Water Disinfection for Oil and Gas Water Treatment; Frac water treatment for oil and gas industry
Oil-Water Separation System for Industrial Wastewater
cleaned oil to be in a state of emulsion, which cannot be efficiently treated by conventional gravity separator. In this report, specifications for the design of a new oil-water separator will be given to meet the stringent municipal regulation of a discharge wastewater concentration of 30 mg/L or less .
Oil Water Separators for Wastewater Treatment - Ecologix Systems
Oil Water Separators Oil water separators can efficiently aid in the removal of gasoline, diesel fuel, crude, vegetable and almost any type of oil that is lighter than water. The effluent from oil / water separators is typically discharged to either a sanitary sewer system or a storm sewer.
Oil treatment: Turning waste oil into profit - Filtration
Filtration can be used to recycle waste oil. High quality fuel oil can be processed from waste oil. The units large filtration surface and self-cleaning wiping system minimises blockage and results in less wasted product. A pdf version of this article is available on the right-hand side under Downloads
Waste Oil Sludge Processing and Recovery Solutions
Two well-known and proven waste oils layouts are: Waste oil, water, and solids separation in one high performance 3-phase decanter centrifuge. Oil quality produced in such a system is usually good enough for return to the crude oil side of the refinery. Typical 3-phase decanter performance: Oil phase: 1-3% water; Below 1,000 ppm solids; Water phase:
API oil–water separator - Wikipedia
An API oil–water separator is a device designed to separate gross amounts of oil and suspended solids from the wastewater effluents of oil refineries, petrochemical plants, chemical plants, natural gas processing plants and other industrial oily water sources. The name is derived from the fact that such separators are designed according to standards published by the American Petroleum Institute.
Refinery wastewater treatment: A true technological challenge
Refinery wastewater treatment: A true technological challenge. The design and operation of modern refinery wastewater treatment plants are challenging and are essentially technology driven
Slop Oil Treatment System|GenOil Inc.
Slop-oil or waste oil must go through purification in order to be used as fuel in waste oil fired boilers or incinerators, or be sold to refineries. Purification is carried out in several steps involving the removal of solids and water.